Floor area ratio calculator.
FAR and lot coverage, free.
Floor area ratio (FAR) is the floor area on a lot divided by the lot area. On a 5,000 sq ft lot, a FAR of 2.0 permits 10,000 sq ft of floor area, and 60% lot coverage permits a 3,000 sq ft footprint. A project of 8,400 sq ft on a 2,800 sq ft footprint has a FAR of 1.68 and can still add 1,600 sq ft.
Floor area ratio calculator, architekten.frontierx.ch/en-us/tools/floor-area-ratio-calculator/
Still possible, floor area
1,600 sq ft
Lot area: 5,000 sq ft (0.115 acres)
| Figure | Project | Permitted | Area permitted | Still possible |
|---|---|---|---|---|
| FAR (floor area) | 1.68 | 2.0 | 10,000 sq ft | 1,600 sq ft |
| Lot coverage (footprint) | 56% | 60% | 3,000 sq ft | 200 sq ft |
Working
- FAR of the project = 8,400 sq ft ÷ 5,000 sq ft = 1.68; permitted floor area = 2.0 × 5,000 sq ft = 10,000 sq ft; still possible = 10,000 sq ft − 8,400 sq ft = 1,600 sq ft (84% of the permitted floor area used).
- Lot coverage of the project = 2,800 sq ft ÷ 5,000 sq ft × 100 = 56%; permitted building footprint = 60% × 5,000 sq ft = 3,000 sq ft; still possible = 3,000 sq ft − 2,800 sq ft = 200 sq ft (93.33% of the permitted building footprint used).
- Permitted floor area ÷ permitted footprint = 10,000 sq ft ÷ 3,000 sq ft = 3.33: the number of floors that use the whole FAR if every floor covers the whole permitted footprint.
Your zoning code defines what counts as floor area, as footprint and as lot area. The calculator takes the areas as you enter them.
Your inputs stay in this browser.
ArchX works out the zoning limits for a lot with the code sections and turns them into massing options with gross area and unit count, as a PDF for the client and a spreadsheet with the numbers. Try free for 7 days
How FAR and lot coverage are worked out.
Each figure is one division by the lot area, and the permitted area is the same division the other way round.
- FAR of the project. Floor area ÷ lot area.
- Permitted floor area. Permitted FAR × lot area.
- Lot coverage of the project. Building footprint ÷ lot area × 100.
- Permitted footprint. Maximum lot coverage × lot area.
- Still possible. Permitted area − the project’s area. Below 0, the project is over the limit.
Example: a 5,000 sq ft lot, a permitted FAR of 2.0 and a maximum lot coverage of 60%. The project has 8,400 sq ft of floor area on a 2,800 sq ft footprint. FAR = 8,400 sq ft ÷ 5,000 sq ft = 1.68. Permitted floor area = 2.0 × 5,000 sq ft = 10,000 sq ft, so 1,600 sq ft are still possible. Lot coverage = 2,800 sq ft ÷ 5,000 sq ft × 100 = 56%. Permitted footprint = 60% × 5,000 sq ft = 3,000 sq ft, so 200 sq ft are left. Built over the whole permitted footprint, the permitted floor area takes 10,000 sq ft ÷ 3,000 sq ft = 3.33 floors.
The limits in the example are entries, not the limits of a real district. Take yours from the zoning code that applies to your lot.
What counts as floor area depends on the code.
FAR is always the same division. What goes into it is not.
In New York City, floor area is the sum of the gross areas of the floors, measured from the exterior faces of exterior walls or from the center lines of walls separating two buildings. Cellar space is left out, except where it is used for dwellings, and so is floor space for accessory mechanical equipment (Zoning Resolution, Section 12-10).
In Portland, Oregon, the zoning code counts only the part of a building above ground, measured for each floor from the exterior face, and leaves out basements. The city points out that this differs from how the Oregon Structural Specialty Code defines building area.
So the calculator does not decide what to count. It takes the floor area, the footprint and the lot area as you enter them. Count them the way your zoning code does, and note which definition you used.
What firms ask about FAR.
How do you calculate FAR?
Divide the floor area on the lot by the lot area. New York City’s Zoning Resolution gives the example of a 10,000 sq ft zoning lot with 20,000 sq ft of floor area: a FAR of 2.0. With two or more buildings on the lot, add their floor areas first. Codes write the ratio as 2.0 or as 2:1, and the calculator reads both.
How much floor area does a FAR allow?
Multiply the FAR by the lot area. Portland’s FAR guide: 3:1 on a 20,000 sq ft site allows 60,000 sq ft, and 0.5:1 on a 5,000 sq ft site allows 2,500 sq ft. The guide adds that this floor area can be arranged as taller, narrower buildings or lower, wider ones.
What counts as floor area?
Your zoning code decides. New York City measures floor area from the exterior faces of exterior walls and leaves out cellar space, except where it is used for dwellings, and floor space for accessory mechanical equipment. Portland counts only the part of a building above ground and leaves out basements. Enter the floor area the way your code counts it: the calculator takes it as entered.
What is the difference between FAR and lot coverage?
FAR counts the floor area of all floors. Lot coverage is the part of the lot covered by buildings when viewed from above, as New York City defines it. Portland shows that a FAR of 1:1 can be one story at 100% lot coverage, two stories at 50% or four stories at 25%.
Does every zoning district set a maximum FAR?
No. For its R-7.5(A) single family district, the City of Dallas lists no maximum floor area ratio and a maximum lot coverage of 45% for residential structures. Leave the FAR field empty and the calculator works with lot coverage alone. Zoning check: setbacks, height, coverage and FAR
How many square feet are in an acre?
43,560, as NIST lists it. A lot of 0.25 acres is 10,890 sq ft. Choose acres next to the lot area, or type “acres” after the number.
Are my numbers stored?
No. The calculator runs in your browser and sends your inputs to no server. “Copy link” puts your inputs into the link, and you decide who gets it.
Where the rules come from.
Definitions and examples from the official texts, read on November 16, 2026. The formula itself is one division.
- NYC Zoning Resolution, Section 12-10 Definitions: floor area, floor area ratio, lot area, lot coverage (NYC Department of City Planning)
- City of Portland, Portland Permitting & Development: Floor Area Ratio (FAR), zoning code information guide
- City of Dallas: Zoning districts, R-7.5(A) Single Family 7,500 Square Feet District
- NIST: U.S. Survey Foot, Revised Unit Conversion Factors (1 acre = 43,560 ft²)
The ratio is done.
ArchX does the zoning check.
ArchX works out the zoning limits for a lot with the code sections and turns them into massing options with gross area and unit count, as a PDF for the client and a spreadsheet with the numbers. You check the result. Try it free for 7 days on Mac or Windows, without payment details. After that, $2,290 a year or $229 a month for your firm, including the first person. Each additional person $570 a year or $57 a month. Prices in U.S. dollars, excluding any applicable taxes.
