Archicad’s own AI.
And what ArchX adds.

What Graphisoft’s own AI in Archicad does, from AI Assistant to AI Visualizer, and what ArchX adds in the model: builds elements, quantities, undo, Teamwork.

What does Archicad’s own AI do, and what does ArchX add?

Graphisoft is building its own AI into Archicad: the AI Assistant (Beta) answers questions about Archicad and your own documents, AI Visualizer makes images from the model and sketches, and with Archicad 30 Collaborate or Max the AI can query the model and change properties after you confirm. ArchX adds to that: from one sentence it builds new walls, slabs, doors, windows and rooms, changes and removes them when you ask, takes off quantities per storey and undoes its own changes, from Archicad 28 and without a Collaborate or Max subscription.

What Graphisoft’s AI does

This is how Graphisoft describes its AI in the Archicad 30 help and on its product page, read on 1 November 2026:

  • AI Assistant (Beta, from Archicad 29): helps you learn Archicad, find your way in the documentation and work with the model in natural language. With Spaces it answers from your own documents (Archicad 30).
  • AI Visualizer (Archicad 30, on Studio, Collaborate and Max, Mac and Windows): turns sketches, models and ideas into images, textures and high-resolution visuals. Images from the AI Assistant can be refined there.
  • Tools for AI programs (Beta, Archicad 30, Collaborate and Max only): query the model, counts and quantities by storey, layer, zone or classification, batch edits of properties with preview and confirmation, Teamwork reservations, model health checks and menu commands. Desktop programs such as Claude Desktop can connect this way too.
  • According to Graphisoft, the AI Assistant and AI Visualizer never use project data or prompts to train AI models.

What ArchX adds in the model

None of the tools listed in Graphisoft’s help creates new elements, and deleting is deliberately not available yet, to avoid any loss of data. That is where ArchX comes in:

  • Build: walls, slabs, doors, windows and rooms from one sentence, such as “Draw a small house on the ground floor: 12 by 8 metres outside”.
  • Change and remove: wall thicknesses, heights, openings. ArchX carries out what you ask, checks the result in the model and tells you how to undo it; with ‘Ask for approval’ you see every change on a card first. Nothing is deleted unless you explicitly ask.
  • Undo: ArchX takes back its own changes when you ask.
  • Quantities: areas, volumes and counts per storey straight from the model.
  • Teamwork: ArchX reserves the elements it is about to change first. If someone else holds one of them, nothing runs, and ArchX names who has it.
  • Versions and licence: Archicad 28, 29 and 30 on Mac and Windows, with your existing Archicad licence.
  • Beyond Archicad: tenders, minutes, appraisals and drawings in the same app.

An addition, not a replacement

Both run side by side in the same Archicad. For questions about the software, images from the model and batch edits to properties, Graphisoft’s AI is the direct route. Use ArchX when new elements are to be built, when you need quantities for costs or compliance, or when the work goes beyond Archicad.

How to do it.

  1. 01

    Install ArchX

    For Mac or Windows, 7 days free with your ChatGPT account (Plus or higher).

  2. 02

    Open Archicad

    Archicad 28, 29 or 30 with your project, on the same computer.

  3. 03

    Let it connect

    Ask “What have I got open in Archicad?”. The first time, ArchX sets up the connection itself.

  4. 04

    Say one sentence

    Such as “Add two windows to the south wall, 1200 wide by 1350 high, sill at 900”.

  5. 05

    See the result

    ArchX makes the change, checks it in the model and shows the result in Archicad. With ‘Ask for approval’ you approve every change on a card first.

The acceptance run: a house in Archicad 30, in five sentences.

A fresh test project in Archicad 30 with the UK edition of ArchX, metric, and five sentences: ask, build, take off quantities, add windows and remove the house again. The run showed a card before every change, as ‘Ask for approval’ does today.

The five sentences in the conversation:

  • What have I got open in Archicad?
  • Draw a small house on the ground floor: 12 by 8 metres outside, 300 mm cavity walls 2.7 m high, a ground-bearing slab, one room called Kitchen/Living, and a front door in the north wall.
  • What's the floor area and how many cubic metres of wall is that?
  • Add two windows to the south wall, 1200 wide by 1350 high, sill at 900.
  • Take the house out again.
4 min 45 s

ArchX answer time for all five sentences, measured

84.36 m²

Kitchen/Living, worked out by ArchX from the model

3

changes in the model, all carried out correctly

Acceptance run in the real app on 31 October 2026: Archicad 30 on a Windows PC, fresh test project, no client model. ArchX in Archicad

Asked briefly.

What is the Graphisoft MCP Server?

MCP (Model Context Protocol) is an open standard that lets AI programs talk to other software. With Archicad 30 Graphisoft ships such an access as a Beta, for Collaborate and Max subscriptions only: the AI Assistant or programs such as Claude Desktop can query the model and change properties after you confirm. None of the tools listed in Graphisoft’s help creates new elements, and deleting is not available at present. Graphisoft help

How does ArchX connect to Archicad?

Through Tapir, a free, open-source Archicad add-on that extends the interface Archicad provides for such connections. The first time, ArchX downloads the matching version, checks it and copies it into Archicad’s add-ons folder. Your project files stay as they are.

Do I need Collaborate or Max?

Not for ArchX. ArchX works with Archicad 28, 29 and 30 and your existing Archicad licence. According to Graphisoft, its tools for AI programs come only with Collaborate or Max.

Can I use both at the same time?

Yes. Graphisoft’s AI and ArchX run side by side in the same Archicad; ArchX takes nothing away from the AI Assistant or AI Visualizer.

Does the Archicad connection cost extra?

No. It has been part of ArchX since version 0.0.90. The free trial needs a ChatGPT account, Plus or higher. Pricing

Sources, read 7 November 2026: Graphisoft help: AI Assistant · Graphisoft help: Manage BIM elements · Graphisoft help: Supported tools · Graphisoft help: AI solutions in Archicad 30 · Graphisoft: AI solutions by plan

Try it on your own work.

Download ArchX for Mac or Windows and give it a task from your practice. 7 days free with your ChatGPT account (Plus or higher).