Areas and quantities from IFC.
Checked against the drawing.
How to get room areas and main quantities from an IFC export and measure GIA, GEA and NIA from the PDF sheet, with each value traceable. A test schedule.
How do you get areas and quantities from an IFC model?
Take room areas and counts from the model’s elements and keep the reference with each value, then measure GIA, GEA and NIA from the drawing to the RICS Code of Measuring Practice and compare the two. Where they agree, you can rely on the schedule. Where they differ, or the export is missing something, say so on the schedule rather than filling the gap.
What to check in the export
In our test file the checks found what a schedule should not hide:
- Scale errors: wall bodies 3,000 m high, so wall surfaces and volumes could not be used.
- Missing elements: no floor finishes, so room footprints serve only as an allowance.
- Positions that differ from the drawing: two doors by 700 mm and 100 mm.
- A file header that does not match where the file is said to come from.
NIA rests on assumptions
NIA depends on which areas count as usable and which walls are structural. State the assumption with the figure and show the alternative: in the example, excluding the entrance hall takes NIA from 56.46 m² to 48.66 m².
How to do it.
- 01
Put in the model and the sheet
The IFC export and the PDF of the same floor.
- 02
Say what you need
Room areas, main quantities and the RICS areas, on one schedule.
- 03
ArchX reads and measures
Rooms and counts from the IFC, GIA, GEA and NIA from the PDF.
- 04
Compare and qualify
Room by room against the drawing, with open points named.
A test file: Unit 3, ground floor.
Our test IFC was invented and labelled as a test file. ArchX compared it with the PDF sheet room by room, stated the RICS basis, and listed what could not be relied on, in an Excel workbook and a matching PDF.

ArchX working time, measured
room areas agree between the IFC footprints and the measured PDF
problems in the test file named on the schedule, from a scale error to missing finishes
Test project: an invented test IFC and PDF sheet for “Northgate Architects (fictitious)”. One run of 6 November 2026 with ChatGPT Pro (GPT 6.1 Sol, very high) and the same code as ArchX 0.1.3. How to measure GIA and NIA
Asked briefly.
Does ArchX work with an IFC from Revit?
ArchX reads IFC files. This example is an invented test file, not a Revit export; ArchX reports what the file contains, including what is missing or does not fit. Try it on your own export.
Which RICS basis does it use?
The schedule in the example states the RICS Code of Measuring Practice, 6th edition, and names the assumptions behind NIA.
Can I edit the result?
Yes. The schedule comes as an Excel workbook and a matching PDF in your project folder.
Sources, read 7 November 2026: RICS Code of Measuring Practice
Try it on your own work.
Download ArchX for Mac or Windows and give it a task from your practice. 7 days free with your ChatGPT account (Plus or higher).